We Uses Cookies
This website uses cookies to enhance
your browsing experience.
We Uses Cookies
This website uses cookies to enhance
your browsing experience.
Kirloskar 320 KVA Diesel Generator
The 320 KVA diesel generator is intended for enterprises which require considerable emergency power generation but which do not enter the very heavy-duty generator category from the start.
The Kirloskar 320 KVA diesel genset belongs to the Kirloskar 320-750 KVA range. At present, the Kirloskar specification specifies the 320 KVA unit as KG4-320WS1, having a prime power rating of 320 KVA/ 256kW, frequency 50 Hz, 0.8 power factor, voltage 415V, three-phase.
The issue of the 320 KVA power plant suitability for the enterprise is not in its power capacity, but in its ability to meet the needs of the enterprise in terms of its power consumption, starting characteristics, operating schedule, and possible future growth.
The Kirloskar diesel generators produced by United Power Solution include the 320 KVA – 750 KVA category.
There is a 320 KVA genset that falls under the category and is made for heavy commercial and industrial use.
According to Kirloskar standards, the 320 KVA unit has a prime rating of 256 kW along with G3 governing and 415V 3-phase voltage.
The following capacity can be taken into account for facilities where there are various major loads, and those need to function even if there is a power outage.
However, the final decision should be based upon an expert evaluation of the load requirements.
It could happen that even though two factories need power protection, they would require completely different capacity gensets because of their equipment, motors, and production cycles.
Exact details should always be checked in the most recent supplier quote and manufacturer specification sheets. The current official product specifications include:
Current dimensions listed by the manufacturer for this model are around 4750 mm length, 1700 mm width, and 2005 mm height.
Dimensions are important in designing your generator room or installation space.
_1788111545.png)
You must not choose a 320 KVA generator based on the fact that the total load requirement seems to be near this capacity.
An electrical engineer or generator supplier must analyze:
For instance, a facility may have a high total connected load, yet only use some of its critical equipment in the event of a power outage. In such situations, the generator size may be determined based on the critical load instead of the total connected load.
This is how you will be able to avoid unnecessary expenditure.
It all depends on the specific loads that exist at the site.
Manufacturing Plants
Production equipment, compressors, pumps, controls and lighting can result in heavy electrical loads. A proper genset will provide backup power during power outages for critical production activities.
Commercial Buildings
Lifts, lighting, HVAC systems, server rooms, security systems, and other pieces of equipment may be required to be backed up by a generator.
Hospitals
It is necessary to prioritize critical equipment. The generator will power emergency lighting, medical equipment, and critical HVAC loads.
Warehouses
Contemporary warehouse operations may depend on automated systems, security equipment, refrigeration, lighting, and other equipment.
Construction Sites
Large construction sites may require generators to be installed to provide power for site offices, lighting, pumps, welding equipment, and machinery.
Remember that the generator should be chosen based on the actual equipment used on the site, not the project's name only.
Read more blogs on Medium.com
Among the most effective approaches prior to acquiring a generator is load scheduling.
Develop a list including:
Categorize your loads into two classes:
Critical Loads
Those systems which have to continue running even in case of a power outage.
Non-Critical Loads
Those that may be kept idle till grid power becomes available again.
Thus, this approach will help your supplier to have a better understanding of your requirement.
Moreover, it also avoids generator over-sizing.
Planning is important when installing a 320 KVA generator.
Do not assume that all you need is to place the generator in an available area.
Think about the following points:
According to the Kirloskar specifications, the 320 KVA generator has the following measurements: Length: 4.75 m Width: 1.7 m Height: 2.005 m
A generator is more than just an engine and alternator.
The control system ensures that the genset is monitored, controlled, and operated effectively.
Depending on the configuration of choice, the control system will give you information regarding the genset operating parameters and status.
In a business premise, the information will help you to monitor your generator and troubleshoot any problems with the operation.
When placing your quotation, make sure you get the supplier to explain the control panel features and monitoring options that come with the configuration.
Generator installation is known to cause noise and vibration, more so in urban settings.
It is good to know that the current Kirloskar 320 KVA product specifications indicate better NVH and describe the genset as being suitable for noise sensitive installations.
Even with a suitable generator configuration, quality installation is key.
The installation site should have:
Especially when installing your generator near offices, hospitals, hotels, and other occupied spaces.
In the case of a big diesel generator, fuel planning must go hand-in-hand with the procurement process.
When purchasing a generator, do not just seek the cost of the generator itself but also the cost of its operation through the fuel consumption data of the manufacturer based on the required load.
The quantity of fuel needed by your generator depends on a number of things, including:
When the generator is operated for hours daily, fuel efficiency becomes quite important.
Read more blogs on Tumblr.com
Maintenance shouldn’t wait till the first failure.
Plan your preventive maintenance right from the start.
The regular tests will include:
The Kirloskar Care service includes preventive maintenance for Kirloskar Green gensets in line with the generator capacity and running hours per year.
Genuine parts also ensure compatibility with the engine system of the generator. This is pointed out by the Kirloskar service literature.
When considering purchasing a 320 KVA diesel generator, ensure that your supplier provides you with a written quote consisting of:
_1788111624.png)
This model has a 320 KVA prime rating, which means 256 KW at the rated 0.8 power factor.
The latest specification states that the model is KG4-320WS1.
According to the specification, the generator has 415V three-phase output.
You should make sure you know about your load, starter motors requirement, place of installation, hours of operation, fuel consumption, control system, emission standard, and after sales service.
It can be possible if there is a correct match between load and generator ratings. A load test should be done before buying.
Conclusion
Kirloskar 320 KVA diesel generator is an ideal power source for those applications which require large amount of three phase power supply. The current model is available in capacity of 320 KVA prime power with output of 256 kW, three-phase at voltage 415V and frequency of 50 Hz.
However, the choice of generator is not only about capacity.
Other factors that will have to be considered include the nature of loads, motor starting, space, ventilation, fuel efficiency, control system and serviceability.
United Power Solution is a dealer of Kirloskar generators in several capacities and can provide services including sales, installation, service and rentals.
In case of 320 KVA capacity, discuss your application and load requirements before requesting a quote. You can thereby ensure that you choose a configuration according to your requirements and do not waste on capacity you do not need.
© 2024 United All Rights Reserve
